Predatory ESP32 Firmware
Espressif 32: pioarduino community platform compatible with PlatformIO
nova-x pentesting tool
An advanced WiFi scanning and packet sniffing toolkit for the ESP32-C5, featuring a cyberpunk-inspired web interface.
ZBOSS NCP coordinator firmware for Zigbee2MQTT — ESP32-C6 / C5 / H2 sticks, plus a network-attached gateway on the ESP32-S3 + ESP32-H2 board
E07xESP32C5 is a Sub-GHz & ESP32-C5 module for Flipper Zero. It includes an EBYTE E07-433M20S (PA+LNA), microSD slot, UART pads for GPS, 5V output and a 4-layer PCB with solid ground planes for RF performance.
Wireless ESP32 + AD8232 surface EMG system with real-time WiFi streaming, OTA updates, automatic calibration, and a lightweight Python GUI for live signal monitoring.
Open hardware CM_ESP_P4_C5 dev kit using Espressif ESP32-P4 SOM and ESP32-C5 module. Standard Camemake camera module pinout for vision, HMI and edge control. Full schematics, PCB, firmware, BOM and mechanical so you can build and ship your own product.
Patched fork of esp-hosted-mcu that exposes every radio of an Espressif co-processor over SDIO: Wi-Fi 6, 802.11p / ITS-G5 / V2X, FTM ranging, CSI sensing, ESP-NOW, 802.15.4 / Thread / Zigbee. Research / lab use only.
Utility for ESP32 firmware binaries. Enables post-build data injection, CRC regeneration, and firmware inspection without recompilation. Supports all ESP32 series MCUs. Includes cross-platform CLI tools for automation and CI workflows, a Windows GUI, and Arduino & PlatformIO demos.
A program to flash .bin files loaded on the SD card inside the M5Stack Cardputer ADV to an externally connected ESP32-C5
HellzGate C5 — a 10-node ESP32-C5 passive wireless survey array. One master aggregates GPS-tagged, WiGLE/WDGW-ready scan data from 9 scan nodes over a wired I²C bus. Forked from Hamspiced’s Piglet.
ESP32C5 / ESP32C6 / ESP32H2 Zigbee Coordinator firmware powered by ZBOSS protocol with native zigbee2mqtt support, OTA upgrade support, and Green Power compatibility.
ESPHome re-implementation of the ITS-G5 / IEEE 802.11p receiver for C-ITS / V2X / Car2X
This repository contains the ESP32-C5-CAM (including the MINI series) development board hardware. This includes schematics, PCB. All of these are open-sourced so you can tinker them. Made by EasyEDA.
Add a description, image, and links to the esp32-c5 topic page so that developers can more easily learn about it.
To associate your repository with the esp32-c5 topic, visit your repo's landing page and select "manage topics."